We draw Christmas wallpaper with Christmas balls in Photoshop

If you want to know how to create a postcard for the New Year holidays, then this is a great lesson for you. You will learn how to create an abstract background using brushes and tools. PenTool (Pen), as well as Christmas balls with the tool EllipseTool (Ellipse) and adding different layer styles.

Final result:

Let’s start by creating a new document (Ctrl+N) in photoshop size 1280 at1024 pixels color mode Rgb, resolution 72 ppi. Create a new layer for the background, and fill it with color. # 446828, using a tool Paint Bucket Tool (G) (Fill).

Now we will decorate our background. Take the tool Pen tool (P) (Feather), set the mode on its parameters panel Shape layers (Layer-shape) and draw a shape as shown below. Use foreground color # 830C0C.

Click on the icon Add a layer style (Add layer style) at the bottom of the layers palette and select Drop Shadow style.

Add a layer style Gradient Overlay (Overlay gradient):

Click on the color bar to open it. GradientEditor (Gradient Editor) and set the following colors. Click OK.

Add a layer style Stroke (Stroke) with these settings:

You get this result:

Make a copy of the last layer created, apply the command FreeTransform (Ctrl + T) (Free Transform) to move the copied layer a bit lower. Take the tool Direct selection tool (A) (Arrow / Edit contour) and move the specified datum point slightly down. For this layer use color # CA1515.

Click on the icon Add a layers tyle (Add layer style) at the bottom of the layers palette and select a style Inner Shadow.

Add a layer style Gradient Overlay (Overlay gradient):

Open up Gradient editor (Gradient Editor), set these parameters, click OK.

Add a layer style Stroke (Stroke) with these settings:

You get this result:

Now download a set of brushes for Photoshop with the name c130_splatter.
Create a new layer, set the foreground color to # 302517 and select the following brushes from this set:

Draw with the specified brushes on a new layer, lower Opacity (Opacity) layer to get the following result. Place this layer under layers with red shapes.

Set this layer overlay mode. Overlay (Overlap).

Add a layer mask by clicking on the icon Add layer mask (Add layer mask) at the bottom of the layers palette, select soft brush black (set in the settings Opacity (Opacity) 30%).

While in mask mode, erase the following areas of this layer:

Duplicate the last layer created:

Create a new layer and select a brush. Flat curve thin stiff (Flat thin curved with stiff bristles), set the foreground color to white.
Translator’s note. This brush appeared in PhotoshopCS5, if you have another version of Photoshop, find a similar texture brush.

Draw a scratch on the created new layer with the brush, place this layer under the layers with red shapes.

Install Fill (Fill) of this layer is 43% and change the blending mode to Overlay. Click on the icon Add alayer style (Add layer style) at the bottom of the layers palette and select a style Drop Shadow.

You get this result:

Add a layer mask by clicking on the icon Add layer mask (Add layer mask) at the bottom of the layers palette, select soft brush black (set in the settings Opacity (Opacity) 20%). Paint over the layer mask to change the appearance of the scratches, as shown below.

Duplicate the last created layer, remove the layer mask from the copy (right click on the layer mask, select Delete Layer Mask – Remove layer mask). Add a new mask to this layer by clicking on the icon. Add layer mask (Add layer mask) at the bottom of the layers palette, select a soft black brush (set in the settings Opacity (Opacity) 10%). Paint over the layer mask to get the following result for scratches:

Create a new layer, take a soft brush white, opacity 15%.

Draw this brush on the created new layer in the image to get the following result:

Change the blending mode of this layer to Overlay (Overlap).

Now we will create a Christmas ball. Take the tool Ellipse tool We draw Christmas wallpaper with Christmas balls in Photoshop (U) (Ellipse) and draw such a circle.

Translator’s note. Set the Layer-shape mode, select any color, to obtain an even circle, hold Shift.

Install Fill (Fill) 0% layer, click on the icon Add alayer style (Add layer style) at the bottom of the layers palette and select a style Drop Shadow.

Add a layer style Gradient Overlay (Overlay gradient):

Open up Gradient editor (Gradient Editor), set these parameters, click OK.

The result will be:

Now add light highlights inside the ball, use the tool again. Ellipse Tool (U) (Ellipse).

Install Fill (Fill) 0% layer, click on the icon Add alayer style (Add layer style) at the bottom of the layers palette and select a style Gradient overlay (Gradient overlay).

Open up Gradient editor (Gradient Editor), set these parameters, click OK.

We will have the following result:

Now we add a highlight to the bottom of the ball. Use the tool EllipseTool (U) (Ellipse), to draw the first ellipse color # D12622. Hold down the Alt key or select the option at the top of the toolbar Subtractfromshapearea (Subtract from the figure area), draw a second ellipse to cut a part from the first, as shown below.

Put the Fill (Fill) of this layer 50%.

Again use the same tool, paint a highlight on top of the ball, color # E5282E.

Now we will create a holder for the ball. Take the tool RectangleTool (U) (Rectangle) and draw a rectangle like the one below. Then add an additional anchor point in the middle of the lower part of the rectangle, use the tool AddAnchorPointTool (Pen + (Add reference point)). Adjust the shape of the lower arc with the tool ConvertPointTool (Angle / Convert point).

Install Fill (Fill) 0% of this layer, click on the icon Add a layer style (Add layer style) at the bottom of the layers palette and select a style Gradient Overlay (gradient overlay).

Open up Gradient editor (Gradient Editor), set the specified parameters, click OK.

The result will be:

Using the tool Ellipse Tool (U) (Ellipse), draw the next element of the ball holder.

Click on the icon Add a layers tyle (Add layer style) at the bottom of the layers palette and select a style Gradient overlay (Gradient overlay).

Open up Gradient editor (Gradient Editor), set the specified parameters, click OK.

We get the following result:

Now we will create another element of the ball holder, use the same tool EllipseTool (U) (Ellipse), color # 241A0F.

Create a loop for the ball holder; we will use tools for this. EllipseTool (U) (Ellipse) and RectangleTool (U) (Rectangle). First take the tool EllipseTool (U) (Ellipse) and draw an ellipse as shown below, then hold down Alt, take the tool RectangleTool (U) (Rectangle) and draw a rectangle to cut off the extra bottom of the ellipse. Put the Fill (Fill) This layer is 0%.

Click on the icon Add a layer style (Add layer style) at the bottom of the layers palette and select a style Stroke (Stroke).

You get this result:

At this stage, our postcard looks like this:

Create a group of layers and place into it all the layers related to the ball (select the desired layers on the layers palette and hold down the left mouse button and drag them onto the icon Createanewgroup (Create a new group) at the bottom of the layers palette). Create a copy of the new layer group and apply the transform. FreeTransform (Ctrl+T) (Free transform), To reduce the size of the second ball, place it as shown below.

Now let’s add little stars to the work. Take the tool CustomShapeTool (U) (Arbitrary shape), open the shape selection menu and select the shape there five PointStar (5-pointed star).

Draw the stars in the image, use # FBF1B7 and # 2A361C for this color.

Now create a new document with a size of 1 by 3 pixels, RGB mode, resolution of 72 pixels / inch with a transparent background. Take the tool PencilTool (B) (Pencil), Set the brush size to 1 pix and draw two white dots in the image as shown below. Select from the menu Edit > DefinePattern (Editing-Define the pattern). Enter a name for the pattern in the appropriate dialog box.

Return to your main job. Take the tool PenTool (P) (Feather), set the mode in its settings ShapeLayers (Layer-shape) and draw a thread for the ball, as shown below.

Put the Fill (Fill) This layer is 0% and open the layer style window. Tab BlendingOptions (Overlay Options) check the options LayerMaskHidesEffects (The mask layer hides the effects).

Now select the layer style Stroke (Stroke). Specify FillTypePattern (Stroke type – Pattern), select the pattern you created and click OK.

We got this result:

Add a mask to this layer and select a soft black brush.

Paint on the mask with this brush to hide the excess thread in the area of ​​the ball holder, as shown below.

Using the same technique, draw the thread for the second ball.

Click on the icon Createnewfilloradjustmentlayer (Add new adjustment layer or fill layer) at the bottom of the layers palette, select Curves (Curves) and set the following settings for small color correction.

We will have the following result:

Merry Christmas and Happy New Year!

Here you can see the full size of the work.

Author: ART-D
Translator: Elena Vinogradova
Source link

Like this post? Please share to your friends: